Custom Muzzle Brakes Full Action Truing
Custom Bolt Action Rifle &
Chamber, headspace, thread, crown, and install barrel - $175
Chamber for magnum cartridge, headspace, thread, crown and install barrel - $175
Cut off Threads and Re-chamber, Re-thread & Re-crown-$175
Broughton, Lawton, Krieger, Lilja, and others.
All barrel prices are retail from the supplier with the cost of shipping from them added.
Brakes My Nawakwa brake installed-$150
All other brakes installed-$75+ brake, All brake prices are retail from the supplier with the cost of shipping from them added.
Re-Crown, 11o Indicated, Recessed or Flat Target Crown- $45
Cut and Crown barrel- $75
Reamer is run in to the bottom of the shoulder giving the same neck diameter and throat as your chamber. For checking should bump and this allows a quick check on neck diameter and also is an easy way to find a starting seating depth. This is only for chambers without special throating, (ie. separate throating reamer)- $25
Custom Loading Dies: Sizing die cut with a sizing reamer- $175
Seating die cut with the same reamer as your chamber-$125
Square Receiver Face, Square receiver lugs, Threads re-cut, all done on same setup. Replace recoil lug with PTG recoil lug, Square bolt face and lugs- $175.00
Ream raceway to .705, and bush bolt, front and rear- $150.00
Install sako or M-16 extractor includes extractor $120.00
Pillar bed, benchrest or hunting stock- from $200.00
Please click on the link below to see some the Nawakwa Accuracy videos on YouTube.